|
|
|
|||||||||||
|
|
|||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Centre Part No. |
150 |
200 |
300 |
400 |
500 |
600 |
*S .030 |
.100 2.54 |
.100 2.54 |
.200 5.08 |
.200 5.08 |
.400 10.16 |
.400 10.16 |
D +.004 -.001 |
0.16 .406 |
.020 .508 |
.020 .508 |
.020 .508 |
.025 .635 |
.025 .635 |
AWG# |
26 |
24 |
24 |
24 |
22 |
22 |
Z5U and 601 General Purpose
Centre Part No. |
Maximum Capacitance |
L |
W |
T |
S* |
D* |
||
50 Volts |
100 Volts |
200 Volts |
||||||
150 |
.15 mfd |
.068 mfd |
.033 mfd |
.150 3.81 |
.150 3.81 |
Thickness varies with capacitance and voltage required |
.100 2.54 |
.016 .406 |
200 |
.33 mfd |
.15 mfd |
.1 mfd |
.200 5.08 |
.200 5.08 |
.100 2.54 |
.020 .508 |
|
300 |
1.5 mfd |
.68 mfd |
.33 mfd |
.300 7.62 |
.300 7.62 |
.200 5.08 |
.020 5.08 |
|
400 |
3.3 mfd |
1.5 mfd |
.68 mfd |
.400 10.16 |
.400 10.16 |
.200 5.08 |
.020 5.08 |
|
500 |
4.7 mfd |
2.2 mfd |
1.5 mfd |
.500 12.30 |
.500 12.30 |
.400 10.16 |
.025 .635 |
|
600 |
6.8 mfd |
3.3 mfd |
1.5 mfd |
.600 15.24 |
.600 15.24 |
.400 10.16 |
0.25 .635 |
|
X7R stable
Centre
Part No. |
Maximum Capacitance |
L |
W |
T |
S* |
D* |
||
50 Volts |
100 Volts |
200 Volts |
||||||
150 |
.1 mfd |
.047 mfd |
.022 mfd |
.150 3.81 |
.150 3.81 |
Thickness varies with capacitance and voltage required |
.100 2.54 |
.016 .406 |
200 |
.15 mfd |
.1 mfd |
.047 mfd |
.200 5.08 |
.200 5.08 |
.100 2.54 |
.020 .508 |
|
300 |
.47 mfd |
.33 mfd |
.15 mfd |
.300 7.62 |
.300 7.62 |
.200 5.08 |
.020 5.08 |
|
400 |
1.25 mfd |
.68 mfd |
.33 mfd |
.400 10.16 |
.400 10.16 |
.200 5.08 |
.020 5.08 |
|
500 |
2.2 mfd |
1.5 mfd |
.47 mfd |
.500 12.70 |
.500 12.70 |
.400 10.16 |
.025 6.35 |
|
NPO ( COG ) NPO low loss, high stability
Centre Part No. |
Maximum Capacitance |
L |
W |
T |
S* |
D* |
||
50 Volts |
100 Volts |
200 Volts |
||||||
150 |
2400 pf |
1800 pf |
820 pf |
.150 3.81 |
.150 3.81 |
Thickness varies with capacitance and voltage required |
.100 2.54 |
.016 .406 |
200 |
4700 pf |
3300 pf |
1500 pf |
.200 5.08 |
.200 5.08 |
.100 2.54 |
.020 .508 |
|
300 |
.020 mfd |
.015 mfd |
5600 pf |
.300 7.62 |
.300 7.62 |
.200 5.08 |
.020 5.08 |
|
400 |
.039 mfd |
.033 mfd |
.015 mfd |
.400 10.16 |
.400 10.16 |
.200 5.08 |
.020 5.08 |
|
500 |
.056 mfd |
.05 mfd |
.027 mfd |
.500 12.70 |
.500 12.70 |
.400 10.16 |
.025 .635 |
|
 |
|
| Home | News & Events | Contacts | Directions | Careers | |
| Piezoceramics | Single Crystal Piezoelectrics | Piezoelectric Actuators | Specialty Capacitors | |
| Single Crystal Piezoelectric Materials | Piezoceramic Materials | Electrostrictive Materials | |
 |
|
|
TRS Technologies, Inc.
2820 E. College Avenue, Suite J State College, PA 16801 USA phone: 814/238-7485 fax: 814/238-7539 |
|
|
©2010 TRS Technologies, Inc. - The information presented on this site has been carefully checked for accuracy and is believed to be correct and current. TRS assumes no responsibility for the correctness of this information, nor for damages consequent to its use. All specifications, tolerances, and the like are subject to change without notice. |
|
