Piezoceramics - Available Shapes and Sizes
Finished Piezoceramics and Piezoelectric Crystals
| |
Plates |
| Piezoceramic |
Max |
Min |
Tol |
| Length |
3.5” (90mm) |
0.04” (1mm) |
±0.001” (±0.025mm) |
| Width |
2.5” (63.5mm) |
0.04” (1mm) |
±0.001” (±0.025mm) |
| Thickness |
0.5” (12.7mm) |
0.004” (0.1mm) |
±0.0005” (±0.0127mm) |
|
| Single
Crystal Piezoelectric |
| PMN-PT |
Max |
Min |
Tol |
| Length |
1.0” (25mm) |
0.04” (1mm) |
±0.004” (±0.1mm) |
| Width |
1.0” (25mm) |
0.04” (1mm) |
±0.004” (±0.1mm) |
| Thickness |
0.08” (2mm) |
0.004” (0.1mm) |
±0.001” (±0.025mm) |
|
|
| |
Discs/Ring/Tube |
| Piezoceramic |
Max |
Min |
Tol |
| Outer Diameter |
2.5” (63.5mm) |
0.04” (1mm) |
±0.001” (±0.025mm) |
| Inner Diameter |
2.48” (63mm) |
0.04” (1mm) |
±0.001” (±0.025mm) |
| Thickness |
0.5” (12.7mm) |
0.004” (0.1mm) |
±0.0005” (±0.0127mm) |
|
| Single
Crystal Piezoelectric |
| PMN-PT |
Max |
Min |
Tol |
| Outer Diameter |
1.0” (25mm) |
0.04” (1mm) |
±0.004” (±0.1mm) |
| Inner Diameter |
0.78” (19.8mm) |
0.04” (1mm) |
±0.004” (±0.1mm) |
| Thickness |
0.08” (2mm) |
0.004” (0.1mm) |
±0.001” (±0.025mm) |
|
Rings and Tubes Require Tool Dressing for Concentricity and Therefore have
Tighter Tolerance
Plate and Disk Tolerance can be Tightened on Special Request
Electrodes: Sputtered Cr/Au; Electroless Ni (with Au overcoat); Fired Ag
Disclaimer*: Not all ceramic compositions are available in all sizes.
The following data sheet is available to download:
Data sheets can be viewed using the free Acrobat® Reader.
|
